Single Phase Meter 80A
The smart-me Single Phase Meter 80A is an energy meter with an integrated WiFi interface for transmitting real-time data. The meter automatically synchronises the measured values to the smart-me Cloud in encrypted form. The data can be exported to third-party systems and processed further in the smart-me portal or via our open interface. The meter has a digital output for controlling potential-free devices.
Functions
-
Installation with the free smart-me app.
-
Control with if/then actions or event actions
-
Potential-free contact output for controlling external devices
-
Potential-free contact input for tariff signal or digital input
-
Interfaces via API, CSV, MSCONS and IS-E
-
Encrypted real-time data connection to the smart-me Cloud
Technical data
| Feature | Value |
|---|---|
| Product certification | CE |
| Accuracy class | Class 1 according to EN 50470-1 (IEC62053-21), 1% over the entire measuring range |
| Direction | +A (consumption), -A (delivery) |
| Mains voltage | 85-253 VAC 50/60 Hz |
| Maximum current Imax | 80 A |
| Temperature range | -40°C to +70°C |
| Rel. humidity | Annual average 75%, non-condensing short-term 95%, non-condensing |
| Measured values | Active energy (kWh), active power (kW) Current (A), voltage (V), power factor (cosφ) |
| Self-consumption | < 0.8 W |
| Tariffs | Two via digital tariff input E1, unlimited virtual tariffs in the smart-me Cloud |
| S0 output | 1'000 Imp/kWh |
| Digital input / tariff | Potential-free input, 25-253 VAC/VDC |
| Digital output / S0 | Potential-free output, 12 VDC / 230 VAC, max. 0.4W |
| Communication | WLAN IEEE 802.11 b/g/n (2.4 GHz) |
| Data volume | < 75MB/month |
| Data rate | < 0.1 Mbit/s |
| WLAN security standard | WEP, WPA-PSK/WPA2-PSK |
| Data storage | 2 months |
| Firmware update | Possible online |
| EMC immunity | EN 61000-6-2 (industrial environment) |
| EMC emission | EN 61000-6-3 (residential environment) |
| Protection rating housing/terminals, use | IP20 / IP51 (installed in control cabinet), indoor |
| Mounting | DIN rail |
| Dimensions | 2 modules, L:90mm W:36mm H:65.7mm |
| Server location | Switzerland |
| Protection class | II |
| Last change | 25.09.2023 |
Display
The meter alternately shows different values.
-
"So XXXX" is the installed software version.
-
"CH XXXX" is the checksum of the software.
-
"Number + T1/T2" is the respective tariff value
-
"Er XX" is an error code.
Dimensions and connections
*.DXF and *.DWG data can be found in the ZIP archive in the downloads.
Dimensions
Connection diagram
Button functions
T(4) button for installation
Pressing the T(4) button for 10 seconds creates a local WiFi for the installation
Configuring inputs and outputs
The Single Phase Meter 80A has one digital output and one digital input, which can be used as pulse inputs and outputs or as a switchable potential-free contact. You can find details on the wiki page Input and Output Configuration
Shipping information
Article number: 152050 Article name: smart-me Meter 1-phasig, 5(80)A
Customs tariff number: 9028.3011
Weight including packaging: 130g
Downloads and declaration of conformity
Connection diagram ZIP files (*.DXF and *.DWG data can be found in the ZIP archive)
FAQ
At what interval do the meters send data?
-
With Basic or Limited licences: max. once per minute.
-
With Pro licensing: max. once per second
Can I reset the meter reading to zero?
No. Because our meters are used for billing, they cannot be reset.