Skip to main content

Eniris

The SmartgridOne energy management system from Eniris reads smart-me meters and charging stations directly via Modbus TCP.

Eniris has been developing energy management systems since 2018 and is headquartered in Belgium, with a branch in Switzerland. SmartgridOne controls batteries, charging stations, photovoltaic systems, heat pumps and switchable loads in a coordinated way. In Switzerland, SmartgridOne is sold exclusively through Solarmarkt, which also provides support.

Eniris logo: a lightning bolt in a red circle next to the ENIRIS lettering

Target group:

  • ZEV

  • Single-family home

  • Multi-family home

Connection type:

Direct integration via Modbus TCP for local communication.

Requirement:

Integrated devices​

In SmartgridOne, these devices are available under Devices as a standard integration via Modbus TCP:

Quick guide​

  1. Enable Modbus TCP on the smart-me device.

  2. Note the IP address or host name of the device. Both are shown in the portal under Device → Configuration → Advanced Settings (Gerät → Konfiguration → Erweiterte Einstellungen). Other ways to determine the address are described under Finding the address of the device.

  3. In SmartgridOne, add the smart-me device under Devices.

  4. Enter the IP address or host name and save.

Restrictions apply to the Pico in load management: only a single device or the master of a group can be reached via Modbus TCP. The details are described under Pico and Modbus TCP specifics.

Contact​

Solarmarkt GmbH

Sales and support in Switzerland.

Neumattstrasse 30, CH-5000 Aarau

+41 62 200 62 00 · info@solarmarkt.ch · www.solarmarkt.ch

Eniris

Manufacturer of SmartgridOne.

eniris.com